Vendor: Lucent Lighting

Soft70 GEN2 Fixed Trim Downlight

The Soft70 GEN2 Fixed Trim is a recessed downlight supplied with a standard trim kit, offering a classic and clean finish. Available in white, black, and a selection of premium plated finishes, it complements a wide range of interior design styles.

Colour: White
Colour Temperature: 2200K
Beam Degree: Spot

Usually ships within 10-14 working days

Built To Order Item, we are unable to accept returns unless they are found to be faulty.

The Soft70 GEN2 Fixed Trim is a recessed downlight supplied with a standard trim kit, offering a classic and clean finish. Available in white, black, and a selection of premium plated finishes, it complements a wide range of interior design styles.

This fitting supports a variety of LED light sources, including Lucent’s LED50 ONE family of modules, allowing for flexibility in output, beam angle, and colour temperature. All Soft70 GEN2 downlights are tested and approved to EN 1363-1:2020 and EN 1365-2:2014 for 60-minute fire protection and must be specified with the correct fire-rated code to ensure compliance.

Overall Diameter: 70mm Ø

Depth: 97mm + 25mm

Cut Out: 83mm Ø

Tilt Angle (°): -

Rotation Angle (°): -

Light Source: LED

Wattage: 14.8W

Lumens:: 1010lm / 1058lm / 1115lm / 1213lm

Kelvin: 2200K / 2400K / 2700K / 3000K / 4000K

CRI: 95+

Beam Degree: SP (12°) / MF (19°) / FL (30°) / WFL (57°)

Driver Required: Yes - Remote mounted

Switched: -

Dimmable: Yes

Dimming Type: Mains (0-10V / Dali) on request

Voltage: 36V

IP rating:: IP54 / IP65

Fire rated:: Yes - On Request

The Soft70 GEN2 Fixed Trim is a recessed downlight supplied with a standard trim kit, offering a classic and clean finish. Available in white, black, and a selection of premium plated finishes, it complements a wide range of interior design styles.

This fitting supports a variety of LED light sources, including Lucent’s LED50 ONE family of modules, allowing for flexibility in output, beam angle, and colour temperature. All Soft70 GEN2 downlights are tested and approved to EN 1363-1:2020 and EN 1365-2:2014 for 60-minute fire protection and must be specified with the correct fire-rated code to ensure compliance.

Overall Diameter: 70mm Ø

Depth: 97mm + 25mm

Cut Out: 83mm Ø

Tilt Angle (°): -

Rotation Angle (°): -

Light Source: LED

Wattage: 14.8W

Lumens:: 1010lm / 1058lm / 1115lm / 1213lm

Kelvin: 2200K / 2400K / 2700K / 3000K / 4000K

CRI: 95+

Beam Degree: SP (12°) / MF (19°) / FL (30°) / WFL (57°)

Driver Required: Yes - Remote mounted

Switched: -

Dimmable: Yes

Dimming Type: Mains (0-10V / Dali) on request

Voltage: 36V

IP rating:: IP54 / IP65

Fire rated:: Yes - On Request